Fill out the form to download

Required field
Required field
Not a valid email address
Required field
Required field

Carbuss used SimScale to reduce drag and improve the aerodynamics of its new commercial bus

16% reduction in drag for the bus

Reduction in drag

3 design iterations

Design iterations

$10k average savings in hardware costs

Average savings in hardware

Established in 1946 in Joinville, Brazil, Busscar has 70 years of experience in bus development for the Brazilian and foreign market. After 5 years of closed activities, the brand was acquired by Carbuss in June 2017. With a timeless design and state of the art technology, Busscar is back bringing together with its products the most important asset of the company: the know-how of its previous collaborators.

The Challenge

Find the Drag Forces and Coefficients to Improve the Body Design of a New Commercial Bus

Carbuss is well recognized for its expertise in structural development, with a focus on virtual and physical tests.

Hugo Kuhn (Product Development Engineer) and Fabio Luis Crema (Product Manager)
Fabio Luis Crema (Product Development Engineer) and Hugo Kuhn (Product Development Engineer)

For their new project, VISSTA Bus 360, the company turned to computational fluid dynamics (CFD) simulation to study the new design and achieve the smallest drag possible. Their aim was to deliver to the market an optimized bus with lower fuel consumption and thus reduced operational costs.

Velocity contour around the bus
Velocity contour around the bus

For Carbuss’s core customer base in the transportation industry, fuel consumption is the factor with the strongest influence on overall costs, and is therefore a significant consideration in any new bus purchase. To tackle this issue, Carbuss set out to significantly reduce the drag of their new bus body, especially when compared to their previous model, the VB 360 Elegance.

As beginners in the usage of CFD, the support provided by our SimScale customer success engineer and other application engineers helped us significantly speed up our learning process with the platform and take value out of it.

Hugo Kuhn

Product Development Engineer at Carbuss

How they solved it with SimScale

Testing 3 Different Bus Designs with CFD Simulation

For the first step in the testing process, Carbuss produced three different CAD models, one each for their old and new designs and an extra design from one of their competitors. The geometries were then uploaded into the SimScale platform for meshing. In the cloud environment, a virtual wind tunnel was set up with the proper dimension, in order to capture the fluid development and to correctly calculate the drag forces and coefficients. The domain contained a moving floor and rotating wheels .In order to simulate the bus at 25 m/s (generally considered the safe speed on highways for buses) these wheels were rotated about their axis with an angular velocity that matched the tangential velocity of the floor.

Details of the hex mesh used to run the CFD simulations
Details of the hex mesh used to run the CFD simulations

The Hex Parametric mesher was then used to generate an 18 million cell mesh. To properly create the mesh, features such as inflated boundary layers, region refinements and feature refinements were used in a very quick process that took barely 10 minutes. The meshing operation for all three models was then completed in less than 90 minutes, using a total of 96 cores.Regarding the speed of the meshing process, Carbuss had this to say “This is one of the great benefits of SimScale: the capability to run unlimited operations in parallel without a reduction in computing power.”

Contour of velocities shown as slices of the wake
Contour of velocities shown as slices of the wake

Following the meshing process, the models were ready for simulation. Incompressible fluid flow simulations were performed, again using a total of 96 cores. Different boundary conditions were then applied, such as a 25m/s velocity inlet, a pressure outlet and moving walls for the floor and the angular velocity of each wheel axle. These simulations were succesfully converged and each simulation took around 10 hours to finish.

The results

Reduction in Drag and Design Change Identified

The CFD simulations performed in the cloud with SimScale gave Carbuss engineers, Hugo Kuhn and Fabio Luis Crema, valuable insights into the aerodynamic performance of each bus design version analyzed.

Streamlines around the bus
Streamlines around the bus

After carefully post-processing the data, Carbuss’s engineers were able to propose additional design changes for the final body. One of the primary improvements was the detailed design of the mirrors, which was partially changed after assessing the drag coefficient of the VB 360 Elegance model.

The improved design of the VISSTA Bus 360 reduced drag coefficient by 16% and drag force by 15%, compared to the previous VB 360 Elegance model. The drag force of the new model is even 5% lower than that of the best reference value found of the main competitor model.

“With SimScale, at Carbuss, we were able to assess the drag force and coefficients of our previous bus design and improve it during the early phase of our product development process,” said Hugo Kuhn, Product Development Engineer at Carbuss.

Next Steps

Carbuss Continues to Use SimScale and CFD Simulations During Development Phase

New Busscar bus in development and testing phases
New Busscar bus in development and testing phases (VISSTA Bus 360)

As the VISSTA Bus 360 gets closer to market release, the studies performed with SimScale have had a great impact in the development phase, not only reducing time spent in testing, but also making it possible for Carbuss to deliver a more efficient bus to its clients.

“The SimScale platform was essential to mature our product design! The return on investment is hard to measure at this point, but it will be seen when our customers note that they are acquiring an optimized vehicle with a reduced operational cost compared to our competitors,” said Hugo Kuhn, Product Development Engineer at Carbuss.

If you would also like to virtually test your design with CFD or FEA in the web browser, discover the SimScale plans or learn more about the platform’s features.

Find out how engineering simulation can help engineers design better and more efficient vehicles!