Fill out the form to download

Required field
Required field
Not a valid email address
Required field
Required field

  • Set up your own cloud-native simulation in minutes.

    • Documentation

    SimScale DocumentationSimulation SetupMaterials

    Materials

    In the materials section, you can define multiple materials and assign volumes to them. To do so, click on the ‘+’ button next to Materials.

    selecting a new material in simscale
    Figure 1: ‘+’ button to choose a new material.

    Afterwards, a library of materials appears. Select one material from the list. The specific material parameters to be defined depend on the analysis type of the simulation.

    materials list simscale
    Figure 2: Library of Solid Materials

    User Materials

    Material parameters can be changed once a material is assigned to a simulation domain. If you will be using the same material again and it’s not in the default list, we recommend you to create a User Material that can be used in any of your simulations.

    How To Define Custom Materials In SimScale?

    Company Materials

    Materials can also be uploaded and shared amongst all users at your company. This allows all your users to reference the same material data and ensure consistency across simulations. Please reach out to us if you would like to learn more!

    Solid Materials

    For solid mechanics analysis, every volume that belongs to the simulation domain has to be assigned to exactly one material. For example, in the case of a solid mechanics simulation, you have to choose a material law that describes the relationship between the strains and the consequent stresses. Please be aware that the material behavior can be linear or nonlinear (e.g. plastic material) and therefore may affect the numerical effort of the calculation. Solid material properties and behavior are defined by a thermal solid model.

    changing input for materials
    Figure 3: It’s possible to edit the parameters by clicking on the values and create a customized material.

    Find below the solid material models available on SimScale:

    Linear elastic

    Linear elastic material deforms elastically throughout the analysis, which means that it will return back to its initial state upon unloading, irrespective of the deformation.

    Elasto-plastic

    Elasto-plastic material model describes an elastic behavior until the onset of plasticity after which the solid material undergoes irreversible deformation when subjected to loading.

    Hyperelastic

    Hyperelastic materials are a special class of materials that tend to respond elastically when they are subjected to very large strains. They show both nonlinear material behavior as well as large shape changes.

    Creep

    Creep is the inelastic, irreversible deformation of structures over a long period of time. It is a life-limiting factor and depends on stress, strain, temperature, and time.

    Damping

    Damping, in dynamic simulations, means energy dissipation out of the system. It can be used to remove unphysical oscillations of the system or to mimic effects such as internal friction of the material.

    Young’s Modulus and Poisson’s Ratio

    Definition of Young’s modulus and Poisson’s ratio can be found in the following documents respectively:

    Young’s Modulus
    Poisson’s Ratio

    Fluid Materials

    All incompressible analysis types require the material density (a constant) to be specified by the user. For compressible simulations, the density is solved as part of the equation of state and does not need to be provided in the material definition. Fluid material properties and behavior are defined by the thermophysical fluid model.

    library of fluid materials in simscale
    Figure 4: Library of fluid materials available within SimScale. The properties can be edited.

    Assigning vacuum as the material medium

    Yes! You heard it right! In SimScale it is possible to create a vacuum medium by changing the conductivity of air. Follow the steps:

  • Select Air from the material library.
  • Since fluid conductivity is defined as \(\frac {Density\ (\rho) \times Kinematic\ viscosity\ (\nu) \times Specific\ heat\ (C_p)}{Prandtl\ number (Pr)}\) adjust the values such that conductivity is in the order of 1e-11.
  • In case temperature boundary condition is involved make sure that it is set to a fixed value.

    • Warning

    In single region simulation types (incompressible, compressible, and convective heat transfer), the material can only be assigned to a fluid region. Assigning a material to topological entity sets or advanced concepts will lead to a warning message preventing you from performing the simulation.

    Viscosity Model

    For analysis types that do not include energy/heat, the fluid materials are categorized based on the viscosity model of the fluid. The models generally relate the behavior of viscosity to the strain rate of the fluid. The 2 fundamental types of viscosity models that define any fluid material are as follows:

    Newtonian Model

    In a Newtonian fluid model, the local stresses due to the viscous forces in the fluid change linearly with the local strain rate. Here, viscosity is then the constant of proportionality. The implemented Newtonian model assumes a constant kinematic viscosity \(ν\): $$ν=(μ/ρ)$$ which is specified by the user in units of \(m^2/s\). Some ‘Liquids’ and ‘Gases’, for example, water and air, follow a ‘Newtonian model’ under standard conditions.

    Non-Newtonian Model

    In a non-Newtonian fluid model, the local shear stress and the local shear rate of the fluid are not related linearly. Here, a constant of proportionality cannot be determined and so viscosity is a variable quantity. For these fluids, several non-Newtonian models exist that define the non-linear relation to determine the kinematic viscosity, ν (see link below for details). Some examples of non-Newtonian fluids include common substances like ketchup, custard, toothpaste, corn-starch suspensions, paint, blood, and shampoo.

    Last updated: September 14th, 2022

    Contents