SimScale simulation projects by stadlerj | Page 1

stadlerj's profile

In this validation project a static analysis of a notched plate with an elastoplastic material behaviour is demonstrated.

In this project a dynamic analysis of the rolling of an aluminium plate is demonstrated.

In this project a steady state heat transfer analysis of a led heat sink is demonstrated.

In this project a static analysis of an I-beam under remote force is demonstrated.

In this project a nonlinear static structural analysis of a hand tool is demonstrated.

This project demonstrates a static simulation of a car rim under a distributed load.

In this project a static analysis of a shaft subjected to a user defined rotation and a cyclic boundary condition is demonstrated.

In this project a static linear structural analysis of a wheel loader arm is demonstrated.

This project analyses the creep material behavior of a cube.

In this project a thermostructural analysis of a shell and tube heat exchanger is demonstrated.

This project demonstrates a dynamic simulation of a suspension.

This project performs an uncoupled thermomechanical analysis of a fixed beam under changing temperature.

This project analyzes the creep material behavior of a cube.

In this project a dynamic structural analysis of gears in contact is demonstrated.

In this project a static analysis of a beam und a gravitational load is demonstrated.

In this simulation of a space glider, the thermal and mechanical loads on the space glider's way to space were examined (from a sea-level position to a height of 100 km).

In this project the functionality of centrifugal force on the SimScale platform is validated through a static analysis of a cylinder under rotational load.

This project performs the calculation of eigenfrequencies of an unconstrained sphere.

This project conducts an acoustics frequency analysis of a rectangular cavity.

This project simulates a hollow cylinder under plain strain.

This project conducts a dynamic analysis of a pinned bar under gravitational load.

This project validates distributed pressure and nodal stresses for a thick plate under pressure load.

This project performs a heat transfer analysis of a sphere under convection.

In this project a static analysis of a shaft under a torque load is demonstrated.

This project performs a quasi-static compression analysis of a steel punch on an aluminium cylinder.

This project simulates the response of a paving stone subjected to harmonic pressure.

In this project a static structural analysis of a gripper arm is demonstrated.

In this simulation the impact of an asteroid with different velocities is simulated. In the first simulation the velocity of the asteroid is about 30 m/s and in the second one the velocity is 100 m/s. The second one did not finish, since the velocity was too high.

This project performs a frictionless contact analysis between two spheres.

Public Profile

stadlerj's profile