SimScale simulation projects by bdelatti | Page 1

bdelatti's profile

This project demonstrates how to simulate the airflow around a simplified model of a building.

This project shows the transient thermal analysis of chips mounted on a printed circuit board (PCB) using Code_Aster solver.

The project shows how to use FEA to accurately predict the performance of a thermal shipper pack.

This project shows the nonlinear static analysis of a bridge elastomer bearing pad.

The strength of components is an important requirement in understanding a products performance lifecycle and possible failure modes. Tractors and other agricultural equipment are used in rough terrain and under tough conditions. Immense forces are created when the heavy equipment is in operation. The machinery must endure loads that can be possible miscreated by error of the operators. Those loads bring the tractors to operate outside of their normal operating conditions. So misuse loading simulations is a must in any product development cycle.

This project shows the thermo-structural analysis of a 8 pin Small Outline Integrated Circuit (SOIC) chip with applied heat flux on the main chip core surfaces. It is a copy from another public project made by @ahmedhussain18 but this time the simulaiton ran using Code_Aster.

An exposed building facade is being heated up on one side by sun. Within it we have an air socket that cools the facade with convection motion. The whole wall looks like a sandwich with an air gap. The air gap is open on the bottom and top allowing air to freely move.

This is a demo simulation to show the temperature distribution on a steel plate using orthotropic thermal conductivity.

Public Profile

bdelatti's profile