SimScale simulation projects by rszoeke | Page 1

rszoeke's profile

Evaluation of valve spring stiffness on 3000 and 6000 RPM

Wind Comfort Analysis in a sample city partly on a hill.

In this project a structural and an eigenfrequency analysis of a front wing is demonstrated.

Nonlinear Analysis to asses the force necessary to crush an aluminum pipe

The project try to test how the wind affect the architecture

A sample project to show a possibility how to model pre-stress in a bolt.

In this project, a thermal shock analysis of a globe valve is performed.

Pedestrian Wind Comfort Analysis for assessing the wind speeds in areas meant for recreational use.

Project copied from chrstark: GrabCAD Bearing Bracket - A new bracket design 

In this project a nonlinear dynamic analysis of a valve spring is demonstrated.

A contact analysis of a consumer snap fit mechanism is analyzed in this project.

This project demonstrates a simple simulation of a hollow drawing manufacturing process.

Simple bolted connection contact analysis. Project copied from @potyka_csaba

Loudhailer vibration analysis frame enhancements

Copy of the project Acrylic lid v2 - Acrylid lids for Vacuum Chamber by @rs20
Fixed the initial run failure by adding an additional constrained point and also added a new sim with the advanced static analysis for comparison and highlighting the usage of the remote displacement constraint.

Structure for  steel cylinder which will support about 10 tons of lead

A casing of a mobile phone is tested when being dropped from 2 meters height.

Copy of the project Biegeversuch by @aniossa

Educational Project Example for using a remote displacement as a pin constraint

Copy of the project Particle sim test - Playing around with settings to learn the program by @taylor_timothy

The stress distribution within an impeller is analyzed under vibration load due to bearing tolerances.

A snap-fit is analyzed using a dynamic stress simulation including physical contact between two parts.

CAD geometrie was taken from GrabCAD user rovi

Copy from user gurav_harsh. undercarriage assembly of excavator static structural analysis trial.

To investigate bending displacements of rectangular press plates.

Copy of the project frame - frame test by @sioeng

In this project a frequency analysis of crankshaft is demonstrated.

Trying to apply some FEA methods to an airship envelope.
This envelope is symmetrical front to back so I have only drawn the front half of the envelope and will use a symmetry plane.
The envelope is made out of 76 micron PET plastic film.
I would like to analyse envelope shape and stresses with 3.5x10-4 MPa gauge pressure inside it using air, helium and hydrogen as the internal gas (air at STP will be the gas outside the envelope).
I am hoping that there will be a way to account for the shape and stresses in the fabric that takes into account even the weight of the fabric itself.

Copy of the project  from @zsoltpeitler with some suggested improvements of the setup. No complete project, rather meant as a solid starting point for future work.

In this project a frequency analysis of a disc brake is demonstrated.

Public Profile

rszoeke's profile