SimScale simulation projects by Milad_Mafi | Page 1

Milad_Mafi's profile

Webinar Project- Carotid Artery Bifurcation
The project simulates the flow of blood as a non-newtonian fluid through a realistic Carotid Artery Bifurcation. Simulation are performed for 3 cases- of a healthy blood vessel  with no calcification or blockage and through an moderately and severely calcified or blocked blood vessel. 
The results show the differences in pressure, velocity profile and the outlet flow  through the 2 branches.

Flow conditions are based on a paper: STUDY OF BLOOD FLOW IN A BIFURCATION WITH A STENOSIS,
Sonia I.S. Pinto, E.D. Costa, J.B.L.M. Campos, J.M. Miranda

This project shows how to simulate the airflow around a race car.

This project include a simulation of the external aerodynamics of 2017 F1 race car.

This project demonstrates how to simulate the airflow around a simplified model of a large city.

This project explains how to set up an airflow simulation through a radial impeller.

This project contains everything you need to work on the second homework assignment of the drone workshop

How to simulate the airflow around a building is demonstrated in this project.

In this project a multiphase flow simulation of a stirred reactor is demonstrated.

This project shows how the cooling of a room can be simulated using SimScale.

In this project the transport of exhaust gases into the atmosphere through a chimney of a plant is simulated.

To analyse, and optimise the heating of a residential block using various heating methods.

This project shows how to simulate the airflow inside an office space.

This project demonstrates a multiphase flow simulation of a waterfall.

This project shows an example of how the internal airflow through an air intake can be analyzed.

Related to step-by-step tutorial of the biomedical workshop (session 1)

https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-1-stress-shielding-in-a-hip-joint-prosthesis/36830/3

Pollutant Extraction from Parking Garage - Editorial Demo

The effect of numerics on the simulation quality and convergence time.

This project shows an example of how the internal airflow through an naca duct can be analyzed.

This project shows an example of how the internal airflow through a suction nozzle  can be analyzed.

In this project the fluid flow through the tubes of a shell and tube heat exchanger has been analyzed with SimScale.

This project  focus on the stress analysis of two different models of cardiovascular stent using two different materials - 316 LN Stainless Steel and L605 Co-Cr

CFD-Simulation of 2015s Formula Student Car of Team Starcraft e.V.

Related to step-by-step tutorial of the biomedical workshop (session 2) https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-2-analysis-of-cardiovascular-stent/36862

External Flow Simulation of a UAV plane. 

This project includes everything you need to work on the homework assignement of the drone workshop.


This project contains everything you need to work on your homework assignement

This project includes everything you need to get started with the homework assignment of our makers workshop

External Flow Simulation of a UAV plane. 


This project contains resources for Session 1 of the F1 Workshop

Weight is one of the most critical parameters in aircraft design. In this challenge, you will be provided with a baseline design of an aluminum aircraft wing. Your objective is to reduce the weight of the wing without exceeding the maximum allowable deflection (+ y direction) of .90 meters.

This project contains everything you need to work on the first homework assignment of the drone workshop

This project shows the simulation of a simple hall with open doors.

This project shows how to simulate the airflow around a bob sled.

External Aerodynamics simulaton of a modern sports car. 

This project contains a mesh and a simulation setup of an external aerodynamics analysis for the GO WITH THE FLOW CHALLENGE

This project shows how to simulate the airflow around a sports car.

This project shows the stress analysis of a hip joint prosthesis.

This project contains everything you need to work on the fourth homework assignment of the drone workshop

A structural assessment of a CNC router table is demonstrated in this project.

Public Profile

Milad_Mafi's profile