Looking for valve design simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 1

Transferencia de calor con 500 grados Centigrados sobre concreto refractario

This project involves meshing internally a Ball Valve, and then simulating its' operation when water flows through it. A ball valve is a structure that is placed between two pipelines, connecting them through its' hollow interior by utilizing two diametrically placed holes. For this case, the floating ball has a hollow cylinder through its center, with a diameter same as the inner one of the pipelines. The Cylinder is not parallel to the pipes, and instead it is placed diagonally. A steady state incompressible flow simulation is executed to visualize the flow and its' re-circulation, as well as the critical areas of the pressure drop.

Analysis of PTFE seated double offset buttefly valve design (150 class) In order to evaluate the Cv and pressure drop through valve.

to simulate the pressure differential across the valve on the tank
linear static CFD will be used for this case study
it is required to identify the effect of discharge rate across the valve after a sudden opening of a valve

This project simulates water flow through a Gate valve by using the Incompressible flow simulation type. Main purpose of the project is to obtain the forces acting on the half-open valve and flow pattern through the pipe as it crosses the valve section.

This project simulates opening of a pressure relief valve using 6 DOF body motion.

This project simulates water flow through a double flanged check valve.

This project simulates the effect of valve-positions on fluid flow through a pipeline network.

This project simulates the flow of air through an open Treadle Valve.

valve design | SimScale Project Library | Page 1