SimScale simulation projects by ahmedhussain18 | Page 1

ahmedhussain18's profile

This project demonstrates the static stress analysis of a stacker.

Original project of @hksuthar.

This project shows the thermo-structural analysis of a steam stop valve considering static temperature and pressure.

In this project frequency and harmonic analysis of the Hayabusa engine were performed.

In this project, a dynamic nonlinear impact analysis of a human skull with and without helmet is performed.

This project shows the nonlinear static analysis of a bridge elastomer bearing pad.

In this project basics of conduction, convection and radiation are demonstrated.

This project performs an uncoupled thermomechanical analysis of a fixed beam under changing temperature.

This project shows the thermo-structural analysis of a cracked pipe.

Bridged Insulated Pipe - original project of @pieralessandro 

This project focus on the stress analysis of two different models of cardiovascular stent using two different materials - 316 LN Stainless Steel and L605 Co-Cr.

Related to step-by-step tutorial of the biomedical workshop (session 2) https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-2-analysis-of-cardiovascular-stent/36862

This project demonstrates the stress analysis of a large steel structure.

Original project of @pcachot.

Solving meshing problem - original project of @tcushing.

This project involves the simulation of stress analysis of an aircraft wing. There are total 6 comparison configurations with 3 different models and two different load definition.

This project shows the stress analysis of a polytetrafluoroethylene (PTFE) oil seal is performed both with friction and without friction.

This project shows the nonlinear static analysis of a car suspension.

In this project static stress analysis of a Toyota Hilux bumper was performed.

Original project of @miguel_angel_a

This project shows the transient thermal analysis of chips mounted on a printed circuit board (PCB).

In this project vibration analysis of jet engine is performed.

Heat Transfer Analysis of burner - original project of @jopoy

This project simulates the crossbar impact of David Beckham's fastest kick clocked at 97.9 mph - 157.6 kph.

In this project tension, torsional and bending load tests of a hyperelastic rubber bellow is performed.

In this project a thermal analysis of a laser beam welding (LBW) was performed.

Bracket load analysis - original project of @thawkins.

This project shows the frequency analysis of the truss bridge for first 20 eigenmodes.

Demonstration of sideways moving spring.
Original project of @jvarkevisser

In this project harmonic and static analyses of the Olympic Tower in Munich subjected to wind pressure were performed.

This project shows the transient thermal analysis of a car braking system.

Just trying to qualitatively visualize the crushing behavior of the can using non linear static analysis.

Original project of @stharani

This project demonstrates roller bearing analysis.

This project shows the thermal analysis of a LED with Insulated Metal Substrate - IMS - mounted on different heat sinks.

This project shows the stress analysis of a pressure relief valve (PRV) under operation.

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models used in this analysis are taken from GrabCAD users who were the winners of GrabCAD 'Airplane Bearing Bracket Challenge'. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD.

In this project, thermal stress analysis of polymeric photo-thermal microactuator was performed considering different bending angles and arm widths.

In this project, steady state thermal analysis of a CFL light bulb is performed.

Temperature decrease analysis - Original project of @ybuurman

In this project thermomechanical analysis of a bimetallic strip is demonstrated.

This project tests the durability of a skateboard when it impacts with a ground and bar

This project demonstrates the analysis of a mechanical arm using all available structural solvers on SimScale.

Calculate number of screws (min. distance between them) necessary to compress the automotive electronic gasket and ensure tightness between top and bottom housings for ip67 standards.

Original project of @mydlikowskij

This project was done in order to investigate structural integrity of the designed clamping mechanism.

Original project of @vnguyen.

Modal Analysis of fan

Original project of dario.

Vertical takeoff and Landing analysis of a Harrier

Public Profile

ahmedhussain18's profile