SimScale simulation projects by dheiny | Page 1

dheiny's profile

Project to validate the resistance of a ship hull / vessel under different conditions. Multiphase flow simulation. Turbulent and Laminar.

This project shows how SimScale can be used to analyze the fluid flow through valves.

Robotic gripper FEA stress simulation, copy of https://www.simscale.com/projects/rviswanathan/gripper/

The cooling of a dense packaging of electronics (about 100W) inside an enclosure is simulated.

CAD model from @rbr_ning - Flow simulation and an eigenfrequency analysis performed. CFD pre processing done with Onshape.

Pedestrian Wind Comfort Analysis for assessing the wind speeds in areas meant for recreational use.

Conductive Heat Transfer analysis test through a PCB board (simplified version - incorrect material assignment, just testing geometry and meshing capabilities)

This simulation aims at identifying hot spots in the design of a snow shield that's supposed to be used on a hand-operated snow clearing machine. 
The snow shield is made of steel and will be supporting an horizontal and static load of 80 kN and its attachments will be fixed.
This process will help to improve and optimise the design

Flow simulation study of a dust cyclone separator. Given inlet flow rate and dimension, pressure drop and velocity distribution inside the separator are being analyzed.

Model provided by Axel Ligon (https://grabcad.com/library/standard-faucet-tap-einhebelmischer-inv2014-1). Demo CFD simulation of a mixer tap water faucet.

Enclosure for an industrial application of a GPU on the edge, cooled via an active fan from the top.

Vegetation and trees affecting wind / pedestrian wind comfort

Solar collector roof support structural analysis. Copy from @Marinkorudic

Public Profile

dheiny's profile