SimScale simulation projects by sjoshi | Page 1

sjoshi's profile

This simulation captures the nuances of turbulent pipe flow.

This project simulates the air flow around the Ahmed body for validation purposes.

This project simulates transient wake formation behind a boat.

This project simulates the flow of air through an open Treadle Valve.

This project simulates heating of water using natural convection

Simulation to identify pressure drop and flow distribution across channels. Copied from @rulmismo

This simulation models the behavior of sea waves around a frigate.

This project simulates laminar flow through a straight circular pipe.

This project simulates the exhaust from a 1-5-3-6-2-4 firing order of a 6-cylinder engine.

This project conducts wind-loading and wind-comfort studies in a residential complex. It uses SimScale's Lattice-Boltzmann solver for a transient incompressible analysis. 

This study serves two purposes:

1. Calculation of transient wind-loads on a tall structure in the complex
2. Study of wind flow patterns at pedestrian height

This project simulates the impact of sea waves against the columns of an oil-rig.

This project simulates turbulent flow through a straight circular pipe.

This project simulates the rising of a bubble in fluid due to buoyancy.

This simulation models the flow of air caused due to natural convection of heat from a refrigerator's condenser coils.

This project simulates air flow in an aircraft cabin. Two configurations and their effect on the air flow pattern are shown.

This project simulates the filling of a construction form with concrete.

This project simulates the effect of valve-positions on fluid flow through a pipeline network.

This project simulates the reattachment phenomenon over a backward-facing step.

This project simulates compressible turbulent flow through a de Laval nozzle.

This project simulates Couette flow - flow in annulus fixed-rotating cylinder pair.

Boussinesq Power Sources + Passive Scalar Momentum Sources

This is the first part of the assessment task for the position of CFD Simulation Engineer at SimScale.

Public Profile

sjoshi's profile